Savoie Drive Calibration
Calibration jig for our Savoie drive system. Oscilloscope not shown.
Read More(click to enlarge)
Hot off the press, we just completed fabrication of a custom arm pillar to install a Kuzma 4Point-9 on a Nottingham Spacedeck.
We worked closely with the customer to replicate the key dimensions and adjustment features of the original assembly.
Since you will never get a perfect color match (there are infinite variations of black), we chose to anodize the new assembly rather than powder coat it as is the original.
In this way, the main pillar, the "riser" and the Kuzma mounting collar have the same texture.
Related Posts
NiWatt Amplifier Build – Part 3
(click to enlarge)This is part 3 of our NiWatt build log (installment #2 is here). We’re nearing the finish line with about 3 hours’ work remaining for each amplifier. The observant reader will note that this is a photo of the right ampifier (note the binding post and output transformer location on the left side of
Read MoreNiWatt Amplifier Build – Part 2
NiWatt Build in Progress (click to enlarge)Part 2 of our NiWatt build log (installment #1 is here). At this point, in the build, about 7 hours’ work remains for each amplifier. Shown here are the glass/fiber epoxy boards after “staking” the turrets: 3 boards for each amplifier. Preparing boards to the point shown here
Read MoreA Pass Labs XA-25 Demo With Rockport Speakers
(click to enlarge)We just demo’d a Pass Labs XA-25 amplifier at a customer’s house. The amplifier showed its pedigree, with all of the clarity, delicacy and nuance you’d expect from a Pass Labs design. At the same time, the Rockport speakers showed how power hungry they are. While the amps never sounded stressed (up to sane, but loud
Read More