Savoie Drive Calibration
Calibration jig for our Savoie drive system. Oscilloscope not shown.
Read More(click to enlarge)
Shipping a mounted Van den Hul ...
Preparing a mounted Van den Hul cartridge for shipping is not for the faint of heart.
We recently prepared a Van den Hul Colibri XGW Signature Stradivarius, and these photos are the result.
In a perfect world, cartridges would have stylus guards that actually work, but other design considerations (body resonances) mean that this is not a simple a matter as you would think.
A manufacturer's first goal is to produce good sound, and we all know that mechanical resonances influence the sound of a cartridge.
Body design is as important as the motor assembly, cantilever and stylus.
Van den Hul's naked body design is one key factor in the "Van den Hul sound". They treat resonances with utmost care, and their Stradivarius versions treat the wood body with a lacquer which tunes the resonant signature of the body.
(click to enlarge)
So all is not as it would appear, and shipping a Van den Hul mounted to a removeable headshell requires a bit of creativity.
Related Posts
NiWatt Amplifier Build – Part 3
(click to enlarge)This is part 3 of our NiWatt build log (installment #2 is here). We’re nearing the finish line with about 3 hours’ work remaining for each amplifier. The observant reader will note that this is a photo of the right ampifier (note the binding post and output transformer location on the left side of
Read MoreNiWatt Amplifier Build – Part 2
NiWatt Build in Progress (click to enlarge)Part 2 of our NiWatt build log (installment #1 is here). At this point, in the build, about 7 hours’ work remains for each amplifier. Shown here are the glass/fiber epoxy boards after “staking” the turrets: 3 boards for each amplifier. Preparing boards to the point shown here
Read MoreA Pass Labs XA-25 Demo With Rockport Speakers
(click to enlarge)We just demo’d a Pass Labs XA-25 amplifier at a customer’s house. The amplifier showed its pedigree, with all of the clarity, delicacy and nuance you’d expect from a Pass Labs design. At the same time, the Rockport speakers showed how power hungry they are. While the amps never sounded stressed (up to sane, but loud
Read More