Home » Products » Cables: Power

Power – Fall River and Crystal River

Fall River – from $495

Galibier Design - Fall River Power Cable
Fall River Cable – available in 4 colors
Construction:
  • 12 gauge, shielded, PVC jacketed cable
  • Wattgate IEC connector
  • Pass & Seymour wall plug
  • Available in 4 colors shown
  • Click the “Technical” link (thumbnail, below) for more  details
Introductory Pricing:
  • 4 feet: $495
  • 6 feet: $695
  • 8 feet: $895
  • 10 feet: $995

Upgrade note: for customers who purchased Fall River power cables before release of the Crystal River in April, 2020, we are offering a generous trade-in toward the Crystal River cables. This offer is valid through July 31, 2020. Contact us for details.

Crystal River – from $795

Galibier Design - Crystal River Power Cable
Crystal River with ETI Legato Connectors
Construction:
  • 12 gauge, braided, partially shielded, PVC cable
  • ETI Legato connectors
  • Low capacitance outer jacket
  • Click the “Technical” link (thumbnail, below) for more  details
Introductory Pricing (see note, below):
  • 4 feet: $795
  • 6 feet: $995
  • 8 feet: $1,195
  • 10 feet: $1,295

Galibier Design - Crystal River Power CablePrototyping with the ETI Legato connectors raised the ceiling of our power cable design, and the Crystal River cable was born. Contact us for details, and read about our impressions of them here.

Note:  introductory pricing won’t last much longer.  The US retail price for a pair of these Legato connectors is $458.00.

Word of mouth has always been our best advertiser and this “giveaway” pricing is our way of introducing these cables to the audiophile community.

Background

It’s unlikely that we would have developed these cables had we not been working on the NiWatt amplifiers. The NiWatts are truth-tellers, and a perfect platform for evaluating so little as 1″ of wire.

Every new Galibier turntable and pair of NiWatt amplifiers will be delivered with these cables. The NiWatts and our turntables deserve nothing less.

Perhaps the biggest surprise for us was in powering the Teddy Pardo power supply for our turntables. Hearing is believing!  Contact us for details on our satisfaction guarantee.

Safety Note:

This applies to power (mains) cables and interconnects from all manufacturers!! Never remove or otherwise disable the safety/earth ground on the power (mains) cable of any of your electronics!

Many audiophiles will remove the safety/earth ground (the third prong) from their power (mains) cables. They will leave only one mains cable with an active 3rd, ground prong – typically, their line stage.

They do this in an attempt to eliminate ground loops.

This is a violation of safety code and should be avoided at all costs. You do not want to die for your hobby!

Bypassing the mains ground on any of your power cables presents two safety problems:

  • It puts the burden on the interconnects to carry the safety ground. A safety ground running through an interconnect can fail when potentially lethal currents are present.
  • Some electronics “float” the signal. This means that the “ground” on your RCA/XLR is not not connected to the chassis. With these designs, if the mains cable ground is disabled, the chassis is no longer grounded.

If you have a hum problem (ground loop), contact your component manufacturers for a solution, or alternatively, or implement isolation transformers between the offending components.

In the early days of radio, some chassis had a 50% chance of carrying high voltage! Here’s an interesting read on the All American 5 radio. Scroll to the section: “Potential Hazards of the Design”.

Quick Navigation – Click Thumbnails
Galibier Design - Spring Creek Interconnect
Interconnects
Galibier Design - Wind River Speaker Cables
Speaker
Galibier Design - Crystal River Power Cable
Power
Galibier Design - Clear Creek Tonearm Cable
Tonearm
Galibier Design - Crystal River Power Cable
Technical/Background